CompletedLED CLOCK Controller Board ESP32-32D
STDLED CLOCK Controller Board ESP32-32D
License
：CC BY-SA 4.0
Description
Controller Board used for Led Clock project, based on ESP32D / ESP32E
You have to use an FTDI / UART adapter for the initial flash, or you can build yourself this fancy CH340C adapter.
Please keep in mind that you will need the Segments(x4) (https://oshwlab.com/mariusmym/7seg_40x66) and Dots(x1) (https://oshwlab.com/mariusmym/7seg_dots_40x66) to be able to fully reproduce this project. This project's PCB is just the controller board.
More info about the project can be found here : https://github.com/mariusmym/LedClock-Resized
Design Drawing
The preview image was not generated, please save it again in the editor.BOM
Bom empty
CloneProject Members
Intellectual Property Statement & Reproduction Instructions
This is an open-source hardware project. All intellectual property rights belong to the creator. The project is shared on the platform for learning, communication, and research only; any commercial use is prohibited. If your intellectual property rights are infringed on EasyEDA, please notify us by submitting relevant materials in accordance with the Rules for Complaints and Appeals of IPR Infringement.
Users must independently verify the circuit design and suitability when replicating this project. All risks and consequences are borne by the user, and the platform assumes no liability.
Empty
Comment