6S battery holder copy copy

Ongoing

STD 6S battery holder copy copy

License: CC-BY-SA 3.0

Mode:

Editors' pick

Cloned from 7S battery holder

Update time： 2020-11-09 20:46:27

Creation time： 2019-07-11 22:08:07

Description

** Not tested yet ** See this Video first: https://youtu.be/fL6ugOUgtiU This design improment came from the following video: https://youtu.be/9YwErplHps8 The improvemtns that I made: 1. Different battery holder: A. So the battaris will snap in and will not fall off. B. The battery is not in a case, so better air flow. C. The holders can dissapate the battery heat to the PCB. 2. Large ground plane to cool the battery. 3. Small jumpers so the PCB can be anything from 2S-7S 4. M3 holes to be used with brass spacers. 5. Smaller overall PCB. 6. Some other improments. [Battery Clip](https://www.aliexpress.com/item/10pcs-lot-18650-Battery-Clip-for-18650-CR123A-Battery-Spring-Steel-TBH-18650-CLIP01/32878580008.html?spm=a2g0s.9042311.0.0.217f4c4d52mlR2) [8 Pin Header](https://www.aliexpress.com/item/10pcs-lot-Pin-Header-8-pin-2-54MM-10MM-Long-Needle-Female-Pin-Header-Strip-Stackable/32880820411.html?spm=a2g0s.9042311.0.0.6f3f4c4dLyNjlP)

Design Drawing

schematic diagram

（ 1 / ）

6S Power Bank copy
Open in Editor

PCB

（ 1 / ）

PCB_V3 copy
Open in Editor
6S battery holder
Open in Editor

The preview image was not generated, please save it again in the editor.

BOM

BOM download Purchase Parts

ID	Name	Designator	Footprint	Quantity	BOM_Supplier	BOM_Manufacturer Part	BOM_Supplier Part
1	SMD2920P300TF/15	F1	SMD2920	1	LCSC	SMD2920P300TF/15	C20829
2	Header-Male-2.54_1x5	H1,H2	DIP-1X5P-2.54MM-M	2	LCSC	210S-1*5P L=11.6MMGold-plated black	C124379
3	54_THM-18650_Battery_Holder copy	B1,B7,B8,B9,B10,B11	54 THM HOLE BATTERY HOLDER	6	Digi-Key	54 THM	36-54-ND
4	XT60PW-M	U1,U2	XT60PW-M PCBLIB	2	LCSC	XT60PW-M	C98732