© 2024 EasyEDA Some rights reserved ISO/IEC
Brand new interactions and interfaces
Smooth support for design sizes of over 3W
devices or 10W pads
More rigorous design constraints, more
standardized processes
For enterprises, more professional users
Easy to use and quick to get started
The process supports design scales of 300
devices or 1000 pads
Supports simple circuit simulation
For students, teachers, creators
STD FT8QRP_IRF530
Mode:
** Warning : This project is ongoing and not finalized yet
More details here : https://f5npv.wordpress.com/homebrew-ft8qrp-afp-fsk-trx/
* ==============================================
* F5NPV FT8QRP Transceiver
* CAT is available for Digital mode
* No Rotary encoder since the TRX is controlled by CAT and dedicated for DIgital modes
* =============================================
*
* FT8QRP credits and initial experimentation : http://elektronik-labor.de/HF/FT8QRP.html
* First and initial PCB from UN7FGO : https://easyeda.com/UN7FGO/QRP_FT8_ARDUINO_TRX
* Sketch experimention from JE1RAV : https://github.com/je1rav/QP-7C
* F5NPV Experimentation , input ,addon and mods :
* The Schematic , PCB and sketch are including : LPF switching , LCD display , opto relay control, iéc with multiple device
* Biasing for the IRF530 or/and BS170, Output Transformer, TX and RX management with a relay and sequencer
* On going development :
* SWR/PWR display and monitoring
*/
This is a new winter project and the achievement will be a tiny FT8 QRP TRX using AFP/FSK modulation which is compliant with FT8 , WSPR and probably RTTY.
It is a 4 bands 5W FT8, FT4, JS8CALL, WSPR, and RTTY modes
This an on-going experimentation and details can be retrieve from here : https://easyeda.com/F5NPV/qrp_ft8_arduino_trx_v2
Unfold
Loading...
Do you need to add this project to the album?