CompletedFetHead
STDFetHead
License
：GPL 3.0
Description
This project has been superseded by this one.
Phantom-powered dynamic mic preamp based on the FetHead. A very similar circuit is also used in the Cloudlifter.
STL files for a 3D printable enclosed are included in the attached zip file, as well as a template PDF for shielding, which can be printed and glued to aluminum foil and cut out. Be sure to 3D print both the body and the lid.
Trademark notice:
FetHead is not a registered trademark, therefor I should be permitted to use it in the title.
Design Drawing
The preview image was not generated, please save it again in the editor.BOM
Bom empty
CloneProject Members
Intellectual Property Statement & Reproduction Instructions
This is an open-source hardware project. All intellectual property rights belong to the creator. The project is shared on the platform for learning, communication, and research only; any commercial use is prohibited. If your intellectual property rights are infringed on EasyEDA, please notify us by submitting relevant materials in accordance with the Rules for Complaints and Appeals of IPR Infringement.
Users must independently verify the circuit design and suitability when replicating this project. All risks and consequences are borne by the user, and the platform assumes no liability.
Empty
Comment