OngoingSSD1322 OLED 3-Wire SPI
STDSSD1322 OLED 3-Wire SPI
License
：GPL 3.0
Description
Board that breaks out controls and provides power supply to VCC, VCI, VDD, VDDIO with correct power sequencing and voltages.
You will need to get a SSD1322 OLED Module with ribbon cable.
Board is configured for 3-Wire SPI control of the display.
Design Drawing
The preview image was not generated, please save it again in the editor.BOM
Bom empty
CloneProject Members
Intellectual Property Statement & Reproduction Instructions
This is an open-source hardware project. All intellectual property rights belong to the creator. The project is shared on the platform for learning, communication, and research only; any commercial use is prohibited. If your intellectual property rights are infringed on EasyEDA, please notify us by submitting relevant materials in accordance with the Rules for Complaints and Appeals of IPR Infringement.
Users must independently verify the circuit design and suitability when replicating this project. All risks and consequences are borne by the user, and the platform assumes no liability.
Empty
Comment