© 2022 EasyEDA Some rights reserved
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 30,000 devices or 100,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Std Edition4 Slider I2C slave
License: MIT
This is the circuit board for a 4 slider (or other input) I2C slave designed as part of an interface for sound control modules.
The firmware for this board as well asthe firmware for a master (arduino uno) that allows multiple of these boards to be connected together and act as a sythn interface can be found here: LINK TO GITHUB
This board is based on the ATTINY 441, as it does not need (many) external components and supports I2C in hardware.
Alternate microcontrollers or other revision requests can be made on github or emailed to wo at womeijer.com
ATtiny
Open in editorConnectors
Open in editorSliders
Open in editorPCB_2020-03-06 17:40:35
Open in editorJeff's practice PCB
Open in editorID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | SLIDER60MM | VR1,VR2,VR3,VR4 | SLIDER | 4 |
2 | PTA3043 | VR5,VR6,VR7,VR8 | PTA3043 | 4 |
3 | Address Header | CN1 | HEADER 3X4 | 1 |
4 | ATTINY441-SSU | U1 | SOIC-14_L8.7-W3.9-P1.27-LS6.0-BL | 1 |
5 | 100n | C3,C4 | RAD-0.1 | 2 |
6 | ATTINY1634R-SU | U2 | SOIC-20_L13.0-W7.6-P1.27-LS10.6-BL | 1 |
7 | 100n | C1,C2 | 0805 | 2 |
8 | Header-Female-2.54_1x8 | P1,P2 | HDR-8X1/2.54 | 2 |
9 | M3 | S1,S2,S3,S4 | M3 | 4 |
10 | I2C | J1,J2,J3 | I2C | 3 |
11 | Arduino ICSP External Connector | H5 | ARDUINO ISCP EXTERNAL CONNECTOR | 1 |
Unfold