© 2024 EasyEDA Some rights reserved ISO/IEC
Brand new interactions and interfaces
Smooth support for design sizes of over 3W
devices or 10W pads
More rigorous design constraints, more
standardized processes
For enterprises, more professional users
Easy to use and quick to get started
The process supports design scales of 300
devices or 1000 pads
Supports simple circuit simulation
For students, teachers, creators
STD ESP32 Home automation2
Mode:
PCB_2020-09-07_09-36-20
Open in EditorFirstOneSimple
Open in EditorSecondOnewithLCD
Open in EditorThirdOptionWithMoreDetails
Open in EditorFourthBeforePowerSupply
Open in Editor5-WithPSandExpandablePorts
Open in Editor6.RotationOfDS18xsocket
Open in EditorPCB_2020-09-08_09-36-20
Open in Editor7.WithThickTracks
Open in Editor8.withGPIO21Width_0.700
Open in Editor9.WithMoreOptimizationonTrack
Open in Editor10.WithAllNotationsLabelsForConnectors
Open in Editor11.WithLabelandPINNosMentioned
Open in Editor12.FinalOptimizations1
Open in EditorID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | RELAY | RELAY | CONNECTOR_10PIN_KNC | 1 |
2 | 0.1uF | C2 | 0.1 UF CERAMIC CAPACITOR | 1 |
3 | Analolge 33 | ANALOG33 | PIN 3 | 1 |
4 | 220nF | C1 | CAP-TH_BD5.0-P2.00-D0.8-FD | 1 |
5 | 2 pin power | 5V | 2 PIN PCB | 1 |
6 | Water Height | WATERLEVEL | 4 PIN CONNECTOR | 1 |
7 | GasSmoke | GASSMOKE | 4 PIN CONNECTOR | 1 |
8 | LCD | LCD | 4 PIN CONNECTOR | 1 |
9 | Serial | SERIAL | 4 PIN CONNECTOR | 1 |
10 | DIGIOUT | DIGI21-16 | 4 PIN CONNECTOR | 1 |
11 | 1k | R2 | R_AXIAL-0.5 | 1 |
12 | LM7805EE | U5 | TO220 | 1 |
13 | 12V | V1 | CON2_TORNI_TP1 | 1 |
14 | JST-PH_2-PIN_HEADER | 12VOUT | JST_B2B-PH_HEADER | 1 |
15 | ESP32 DevKit 38pins | ESP32 | ESP32 DEVVKIT 38PIN | 1 |
16 | DHT | DHT | CONNECTOR_3PIN | 1 |
17 | DS18x | DS18X | CONNECTOR_3PIN | 1 |
18 | HallSensor | WATERFLOW | CONNECTOR_3PIN | 1 |
19 | PHSensor | PH | CONNECTOR_3PIN | 1 |
20 | ECSensor | EC | CONNECTOR_3PIN | 1 |
21 | SoilSensor | SOILMOIST | CONNECTOR_3PIN | 1 |
22 | IN4007 | D1 | IN4007 | 1 |
Unfold
Loading...
Do you need to add this project to the album?