© 2024 EasyEDA Some rights reserved ISO/IEC
Brand new interactions and interfaces
Smooth support for design sizes of over 3W
devices or 10W pads
More rigorous design constraints, more
standardized processes
For enterprises, more professional users
Easy to use and quick to get started
The process supports design scales of 300
devices or 1000 pads
Supports simple circuit simulation
For students, teachers, creators
STD SHOAIB BUCKBOOST CONVERTER
Mode:
A buck-boost converter for vehicle-to-vehicle (V2V) charging would allow one vehicle to charge another by adjusting the voltage as needed. Here are some key considerations and design parameters for such a converter Input Voltage Range: Since vehicle batteries typically operate within a wide voltage range, the converter should handle a broad input voltage, likely from around 12V to 60V or higher.
ID | Name | Designator | Footprint | Quantity | |
---|---|---|---|---|---|
1 | 100uF | C2 | 100UF 50V | 1 | C45102 |
2 | 10A10 | D1 | 10A10 | 1 | C2462 |
3 | CONN-TH_2P-P5.00 | INPUT,OUTPUT | CONN-TH_2P-P5.00 | 2 | |
4 | POWER | OPAMP1 | CONN-TH_2P-P5.00 | 1 | |
5 | 50uH inductor | L1 | 150UH INDUCTOR | 1 | |
6 | IRFP460C | MOSFET1 | TO-3P-3_L15.3-W4.5-P5.52-L | 1 | C3281800 |
7 | SIGNAL | SIGNAL1 | HDR-M-2.54_1X2 | 1 | C124375 |
8 | SWITCHS | TEST1 | HDR-M-2.54_1X1 | 1 | C81276 |
9 | TLP250H(F) | U1 | DIP-8_L9.7-W6.4-P2.54-LS7.6-BL | 1 | C88151 |
10 | 10uF | U2 | CAP-TH_BD5.0-P2.00-D0.5-FD | 1 | C3019918 |
11 | 100 | U3,U4,U5 | RESISTOR 0.25K 0.5 WATT | 3 |
Unfold
Loading...
Do you need to add this project to the album?