© 2024 EasyEDA Some rights reserved ISO/IEC
Brand new interactions and interfaces
Smooth support for design sizes of over 3W
devices or 10W pads
More rigorous design constraints, more
standardized processes
For enterprises, more professional users
Easy to use and quick to get started
The process supports design scales of 300
devices or 1000 pads
Supports simple circuit simulation
For students, teachers, creators
STD Adjustable Lab Power Supply 0-38V / 0-5A
Mode:
This is a simple adjustable power supply that with a outpun voltage from 0 to 38V and current 0 to 5A, but since this is a LINEAR power supply I highly recommend to use a large heatsink with active cooling in ordwer to use it up to 5 Amps.
ID | Name | Designator | Footprint | Quantity | |
---|---|---|---|---|---|
1 | GND | GND,+ | ONE_O | 2 | |
2 | IN | VCC | ONE_O | 1 | |
3 | OUT | - | ONE_O | 1 | |
4 | BD140 | Q9 | TO-126-3_L8.0-W3.3-P2.28-L | 1 | C900680 |
5 | 250k | R5 | RES-ADJ_3296W | 1 | C13649 |
6 | 25k | R4 | RES-ADJ_3296W | 1 | C13649 |
7 | 2SD1047 | Q7,Q8 | TO-3P-3_L15.8-W4.8-P5.45-L | 2 | C2688707 |
8 | 10uf | C3 | CPOL-RADIAL-10UF-25V | 1 | |
9 | 4.7uf | C1 | CPOL-RADIAL-10UF-25V | 1 | |
10 | 10k | R7,R10 | AXIAL-0.4 | 2 | |
11 | 100k | R6 | AXIAL-0.4 | 1 | |
12 | 1k | R8 | AXIAL-0.4 | 1 | |
13 | 8.2k | R9 | AXIAL-0.4 | 1 | |
14 | 3.3k | R11 | AXIAL-0.4 | 1 | |
15 | 2.2k | R12 | AXIAL-0.4 | 1 | |
16 | BC547 | Q1,Q2 | TO-92-3_L4.8-W3.7-P2.54-R | 2 | C358533 |
17 | BC557 | Q4,Q5,Q6 | TO-92(TO-92-3F)-2.54 | 3 | C358539 |
18 | 1N4007 | D3 | DO-204AL_BD2.4-L4.7-P8.70-D1.1-RD | 1 | C410859 |
19 | 2nF | C2 | RAD-0.2 | 1 | C19355 |
20 | 10V | D2 | DO-35F | 1 | |
21 | 2.4V | D1 | DO-35F | 1 | |
22 | 0.22 5W | R1,R3 | RESISTOR 5W | 2 | |
23 | 0.1 5W | R2 | RESISTOR 5W | 1 | |
24 | 10k | PR1 | POTENTIOMETER | 1 | undefined |
25 | 100k | PR2 | POTENTIOMETER | 1 | undefined |
Unfold
Loading...
Do you need to add this project to the album?