Your EasyEDA usage duration is brief. In order to avoid advertising information, this action is not supported at present. Please extend your EasyEDA usage duration and try again.
Editor Version×
Standard
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
Profession
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Ongoing
STD
Xadow Audio
License:
Mode:Editors' pick
1.3k
0
0
2
Update time:
2021-04-09 20:10:37
Creation time:
2016-01-11 02:20:53
Description
The Xadow Audio integrates a speaker box and a microphone on one single board. The speaker unit is rated at 0.7Watt with an impedance of 8 ohm. Unlike the common cone type speakers, the loudspeaker driver used on the Xadow Audio has a flat surface and is mounted in a rectangular enclosure, which enables it to reproduce sounds at an amazing effect.
![enter image description here][1]
Include
Xadow Audio *1
FPC Cable 35 PIN * 2
Features:
Open source and modular design
Built-in enclosure for speaker
Combines speaker and microphone on one board
Built-in Xadow Connectors for easy pluggable FPC cables
Stackable and chainable with other Xadow Modules
Perfect choice for your audio and DIY Phone projects
Speaker Box:
Resonant Frequency: 900 Hz
Impedance: 8±20% Ω
Rated Power: 0.7 W
MAX. Power: 1 W
Frequency Range: 900 Hz to 20 kHz
Microphone:
Microphone Sensitivity: -42dBV Typ.
Max Input Sound Pressure: 130dB SPL
Dimensions:
Speaker: 13mm X 18mm X 4.5mm / 0.51” X 0.71” X 0.18”
Microphone: 2.95mm X 3.76mm / 0.12” X 0.15”
Board: 25.37mm X 20.30mm / 1’’ X 0.8’’
From:For more detail, please visit: http://www.seeedstudio.com/item_detail.html?p_id=2554
Xadow Audio
The Xadow Audio integrates a speaker box and a microphone on one single board. The speaker unit is rated at 0.7Watt with an impedance of 8 ohm. Unlike the regular cone type speakers, the loudspeaker driver used on the Xadow Audio has a flat surface and is mounted in a rectangular enclosure, which enables it to reproduce sounds at an amazing effect.
Features
Open source and modular design
Built-in enclosure for speaker
Combines speaker and microphone on one board
Built-in Xadow Connectors for easy pluggable FPC cables
Stackable and chain-able with other Xadow Modules
Perfect choice for your audio and DIY Phone projects
Specification
Speaker Box
Resonant Frequency 900 Hz
Impedance 8 ± 20% ohms
Rated Power 0.7 W
MAX. Power 1 W
Frequency Range 900 Hz to 20 kHz
Microphone
Microphone Sensitivity -42dBV Typ
Max Input Sound Pressure 130dB SPL
Dimensions
Speaker 13mm × 18mm × 4.5mm / 0.51”× 0.71” × 0.18”
Microphone 2.95mm × 3.76mm / 0.12” × 0.15”
Board 25.37mm × 20.30mm / 1” × 0.8”
Hardware Overview
![enter image description here][2]
Related Projects
Check on awesome RePhone projects that has been achieved with RePhone.
A Traceable Dog Collar
5 steps to make a traceable dog collar for your lovely puppy.
![enter image description here][3]
Module Connection
Connect the Modules as instructed, please bear in mind that the unfilled corner should be facing the other side:
![enter image description here][4]
[1]: /editor/20160111/569311af8043c.png
[2]: /editor/20160111/56931247a7e7a.png
[3]: /editor/20160111/56931266ee8eb.png
[4]: /editor/20160111/56931289ca5b6.png
Forked project will be set private in personal workspace. Do you continue?
Clone
Project
The Pro editor is about to be opened to save as. Do you want to continue?
private message
Send message to seeedstudio
Delete
Comment
Are you sure to delete the comment?
Report
Xadow Audio
No Profile
Announcer: seeedstudio
Creation time: 2016-01-11 02:20:53
Published time:
2021-04-09 20:10:37
*
Report type:
Please select report type
*
Report reason:
Please fill in the reason for your report and the content is 2-1000
words
*
Upload image:
+
Upload image
*
Email address:
Please fill in your email address
Report
*
Report type:
Please select report type
*
Report reason:
Please fill in the reason for your report and the content is 2-1000
words
*
Upload image:
+
Upload image
*
Email address:
Please fill in your email address
Report
Submitted successfully! The review result can be viewed in the personal
center, review notification.
Kind tips
Your EasyEDA usage duration is brief. In order to avoid advertising information, this action is
not supported at present. Please extend your EasyEDA usage duration and try again.
Share
Project
Copy
Copy
Scan the QR code and open it on the mobile terminal