2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
Profession
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 30,000 devices or 100,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD
Grove - BLE (dual model)
1.3k
0
0
1
No Profile
License:
Creation time:
2016-07-11 18:58:29
Update time:
2021-04-11 19:21:12
Description
![enter image description here][1]
![enter image description here][2]
![enter image description here][3]
**DESCRIPTION**
Grove - BLE (dual model) v1.0 uses CSR dual mode Bluetooth chip,with the ARM architecture single chip which supports AT instructions, Users can develop flexibly according to the serial baud rate, equipment name, pairing password.
**Features:**
BT Version: Bluetooth Specification V4.0 & BLE
UART send and receive max bytes is 512
Other device to module in SPP mode: 90 Bytes per packet
Other device to module in BLE mode: 20 Bytes per packet
Two data transmission mode, balance mode and high speed mode
Working frequency: 2.4GHz ISM band
Modulation method: GFSK(Gaussian Frequency Shift Keying)
RF Power: -23dbm, -6dbm, 0dbm, 6dbm.
Speed: Asynchronous: 3K Bytes
Synchronous: 3K Bytes
Security: Authentication and encryption
Service: Slave SPP, Peripheral BLE, UUID FFE0,FFE1
Power: +3.3/+5.0VDC 50mA
Long range: SPP 30 meters, BLE 60 meters
Power: SPP 13.5mA, BLE 9.5mA
Working temperature:–5 ~ +65 Centigrade
**Specification:**
![enter image description here][4]
K2:During connected status,It would be disconnected by pressing K2 more than 100ms.During sleeping model,It could be restored through pressing K2 factory settings.
U1:U1 is the wireless module,It includes automatic power on reset circuit.
D1:The led display two work models: sleeping whit It slowly flashing;connected status whit It continuously lighting.
J1:The standard Grove connector.
**Documents:**
Please visit our [wiki][5] page for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to our forum.
For more detail, please visit: http://www.seeedstudio.com/item_detail.html?p_id=2407
[1]: /editor/20160711/5783b7885bf4c.png
[2]: /editor/20160711/5783b78ccf888.png
[3]: /editor/20160711/5783b79185ff5.png
[4]: /editor/20160711/5783b79fe3901.png
[5]: http://www.seeedstudio.com/wiki/Grove_-_BLE_(dual_model)_v1.0