CompletedKEY-P001-0-FPGA Keyboard Single
PROKEY-P001-0-FPGA Keyboard Single
License
：CC BY-SA 4.0
Description
A single keyboard key connected to a FPGA implemented USB keyboard HID.
The key is a Gateron Magnetic Key-Switch, and can be configured as an analog input.
PCB was manufactured by JLCPCB with:
- 6-Layers
- 1mm thick
- 4x4 Panel
- 0.15mm Via
Hand assembly is possible using solder-paste, a stencil and a hotplate. (It may be a challenge given the size of the components!)
Note a programming adaptor PCB is required (GEN-P008-0-T8_Programming_Adaptor)
The design has been verified as working perfectly with no known issues.
Design Drawing
The preview image was not generated, please save it again in the editor.BOM
Bom empty
CloneProject Members
Intellectual Property Statement & Reproduction Instructions
This is an open-source hardware project. All intellectual property rights belong to the creator. The project is shared on the platform for learning, communication, and research only; any commercial use is prohibited. If your intellectual property rights are infringed on EasyEDA, please notify us by submitting relevant materials in accordance with the Rules for Complaints and Appeals of IPR Infringement.
Users must independently verify the circuit design and suitability when replicating this project. All risks and consequences are borne by the user, and the platform assumes no liability.
Empty
Comment