© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD Utils05 simple glide 1u
License: Public Domain
Mode: Editors' pick
# Glide circuit suitable for Eurorack or modular synth or whatever.
- Runs on +/- 12 eurorack style.
- Should fit in a 1u slot.
- See https://audiodiwhy.blogspot.com/2019/11/glide-circuits-part-i-portamento-basics.html for a very good description.
3.3 to 10uf is good for timing.
Linear pot was used..seems fine. 100k to 1M. Higher values will give longer glides.
Design note: the IC and the pot are on opposite sides of the board and its kinda tight.. If you decide to clone and use this project you will need to
- clip the spacer on the alpha pot. Otherwise it touches the IC
- Do the IC first. Trust me on that.
v1.0a - Fixed pot direction.
ID | Name | Designator | Footprint | Quantity | Value | |
---|---|---|---|---|---|---|
1 | 10uF | C1,C2 | PKG-ELE-CAP-D5.0XH11.0XF2.0-VERT | 2 | CONDENSATORE | |
2 | 3.3 uF | C3 | PKG-ELE-CAP-D5.0XH11.0XF2.0-VERT | 1 | CONDENSATORE | |
3 | 100n | C4 | 100NF CAPACITOR | 1 | Ceramic Capacitor | |
4 | Mono Jack Audio | IN,OUT | NKXAUDIO _ THONK _ JACK _ THONKICONN _ 3,5MM | 2 | nkxAudio - Thonkiconn - Mono Jack Audio | |
5 | ALPHA 9MM B100k | POT1 | ALPHA9MM | 1 | ALPHA 9MM VERTICAL | |
6 | 200Ω | R1 | RES-TH_BD2.3-L6.5-P10.50-D0.5 | 1 | RI40-1/4W-22MΩ ±5% T | |
7 | 100kΩ | R2 | RES-TH_BD2.3-L6.5-P10.50-D0.5 | 1 | RI40-1/4W-22MΩ ±5% T | |
8 | Connector_5_pin | U5 | WR_CONNECTOR1 | 1 | Connector_5_pin | |
9 | LM358 | OP1 | PDIP-8_L9.3-W6.4-P2.54-LS7.9-BL-1 | 1 | LM358N_C4366086 | 1 |
Unfold
Loading...
Do you need to add this project to the album?