Wi-Fi HaLow SD Card Carrier

This is a simple carries board that allows for the Morse Micro MM6108 to be plugged into an SD card slot (SDIO bus). Note, you will still need to connect three (3) addional pins to the host. This is compatiable with any module that has the same footprint/pinout as the MM6108-MF08651-US module from Morse Micro.

See Morse Micro's Github for example code to use this.

RF Trace:

> Ensure you select the yes for the "Impedance Control" when ordering the PCB

To calculate the appropriate dimensions for the RF trace the JLCPCB Impedance Calculator. Targeted a trace with 50ohms impedence. Calculated based on JLCPCB's JLC04161H-7628 Stackup 4-Layer Impedance Control Stackup.