pyramidak wall switch 2A AC

This smart wall switch with logic unit Wemos D1 Mini have two silent relays, two switches, and analog sensor port. You can control it with door sensor or motion sensor and by smart home via MQTT communication. 

Advanced firmware

Specify the device type and switching behaviour via the web interface. Select the connected sensors, whether they are switching or measuring something. Adjust the luminosity of external leds. The device can operate autonomously, but by connecting to the central MQTT communication system you access all the states and commands available for creating automations. Firmware can be conveniently updated via a local web server.

More about Firmware (firm.jantac.net)

In the pyramidak firmware in Device setup for Device Purpose select 2-switches and in Sensor menu for Digital sensor select 3-toggle, same for Digital2 sensor.

Open central system

Control the device conveniently by connecting to the central system. Create limitless automation from all your connected switches and sensors. You can create two separate switches or one switch from one device, or even control both switches as one.

More about System (firm.jantac.net)

Non-limiting hardware

The quiet smart double switches with digital and analogue sensor ports allow autonomous operation, web-based management via WiFi, and MQTT protocol capable of communicating with the central system. The device also supports external LEDs and external switches.

More about Hardware (firm.jantac.net)

Parts list - where to buy

WeMosD1mini
relayG3MB-202P
fuse2A250V
switchMicro
switchSlide
connBlue4P
duponHeader3P
HiLink220V5
fuseSlow500mA
capaci10V470uF
wallSwitchRF
ledLightBlue3V