Your EasyEDA usage duration is brief. In order to avoid advertising information, this action is not supported at present. Please extend your EasyEDA usage duration and try again.
Editor Version×
Standard
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
Profession
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
Designed for amateur astronomers and inspired by the [OnStep](http://onstep.groups.io/) hardware solution, **AstrOnStep** is an add-on designed for the Raspberry Pi 5 or 4 minicomputer equipped with the [AstrAlim](https://oshwlab.com/pololamag/astralim) card, specifically designed to manage the motorized aspects of astrophotography sessions. The idea for this electronic card came from a few members of the [Vélizy Astronomy Club (France)](https://www.astro-velizy.fr) who wanted to rationalize and simplify the use of cables for photography nocturnal deep sky, with an open source solution.
This is a computerized positioning system, usually for mounts equipped with stepper motors. The particularity of AstrOnStep is to offer the possibility of controlling 4 stepper motors (among others: mount/focuser/derotator/dome/darkboxes...), with the Raspberry Pi or with OnStep. **AstrOnStep**, interfaced with a Pi 5 and [AstrAlim](https://oshwlab.com/pololamag/astralim) offers the following characteristics:
- Control of **two stepper motor drivers** exclusively by the Raspberry Pi.
- Control of **two stepper motor drivers** either by the on-board OnStep (based on the [minipcb2](https://oshwlab.com/hdutton/minipcb2) solution), or by the Raspberry Pi .
- Two auxiliary outputs controlled by OnStep.
- **A 5-pin female connector** for a mini NEO-6M GPS module, with a PPS (Pulse Per Second) output connected to the Raspberry Pi, providing precise time and positioning for mobile astrophotography sessions, as well than the precision required for occultation measurements.
- **A 32kbit EEPROM** allows the Raspberry Pi to recognize AstrAlim at startup and to execute the scripts necessary for its operation.
In short, with the Raspberry Pi 5 (or 4), the **AstrOnStep** + **AstrAlim** solution offers a reliable, flexible, powerful and energy-efficient solution, ideal for both fixed installations and mobile use . This card also allows you to forget about traditional and expensive proprietary systems, providing all the functions you could need to capture your most beautiful images.
The software is currently being developed and finalized on [github](https://github.com/dgedgedge/AstraSuite). One of our medium-term goals will be to combine this card with the equatorial mount [DHEM, for DIY Harmonic Equatorial Mount](https://github.com/polvinc/DHEM).
Some statistics: 4 layers of copper, 70 components, 2.8m of track, 59 vias, 389 pads, 28 resistors, 13 capacitors, 7 dipswitches, 2 LEDs...
![AstrOnStep](//image.easyeda.com/pullimage/Vb9kZqqx9HKHQLIpyIWhkNMDumMTBNNukPbcg0Ci.png)
Design Drawing
Design Drawing
schematic diagram
(
1
/
)
PCB
(
1
/
)
The preview image was not generated, please save it again in the
editor.
Forked project will be set private in personal workspace. Do you continue?
Clone
Project
The Pro editor is about to be opened to save as. Do you want to continue?
private message
Send message to pololamag
Delete
Comment
Are you sure to delete the comment?
Report
AstrOnStep
No Profile
Announcer: polvinc
Creation time: 2024-03-13 08:00:23
Published time:
2024-07-16 21:09:25
*
Report type:
Please select report type
*
Report reason:
Please fill in the reason for your report and the content is 2-1000
words
*
Upload image:
+
Upload image
*
Email address:
Please fill in your email address
Report
*
Report type:
Please select report type
*
Report reason:
Please fill in the reason for your report and the content is 2-1000
words
*
Upload image:
+
Upload image
*
Email address:
Please fill in your email address
Report
Submitted successfully! The review result can be viewed in the personal
center, review notification.
Kind tips
Your EasyEDA usage duration is brief. In order to avoid advertising information, this action is
not supported at present. Please extend your EasyEDA usage duration and try again.
Share
Project
Copy
Copy
Scan the QR code and open it on the mobile terminal