© 2022 EasyEDA Some rights reserved
Editor Version
×
Standard
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
Profession
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 30,000 devices or 100,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Std edition esp-01 Shield
No Profile
License: GPL 3.0
Description
This shield is designed for easy powering and using two GPIOs of ESP-01/01S module. It is powered by 5 volts DC and has four 3-pin screw terminals for connecting some periphery like 2812 LEDs, relay modules, etc. Also it has a 3.3v power supply on board
Design Drawing
schematic diagram
（
1
/
）
PCB
（
1
/
）
-
ESP-01 Shield PCB v1.62
Open in editor -
ESP-01 Shield PCB v1.63 JLCPCB order
Open in editor -
ESP-01 Shield PCB v1.64
Open in editor -
ESP-01 Shield PCB v1.65
Open in editor
Empty
| ID | Name | Designator | Footprint | Quantity |
|---|---|---|---|---|
| 1 | K2-1102DP-M4SW-04 | BTN | KEY-TH_4P-L6.0-W6.0-P4.50-LS7.5 | 1 |
| 2 | Header-Male-2.54_1x3 | BTN_ON,BTN_TYPE | HDR-TH_3P-P2.54-V | 2 |
| 3 | 22uF | C1 | C0805 | 1 |
| 4 | 100nF | C2 | C0603 | 1 |
| 5 | 10uF | C3 | CASE-B_3528 | 1 |
| 6 | B4B-XH-AM(LF)(SN) | DISPLAY | CONN-TH_B4B-XH-AM(LF)(SN) | 1 |
| 7 | HDR-F | ESP-01 | HDR-F-2.54_2X4 | 1 |
| 8 | A2541WR-3P | FLASH | HDR-TH_3P-P2.54-H-W10.0 | 1 |
| 9 | DC_5.5x2.1mm | P1 | DC_5.5X2.1MM | 1 |
| 10 | MMBT2222A | Q4 | SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | 1 |
| 11 | 1K | R5 | R0603 | 1 |
| 12 | B3B-XH-AM-(LF)(SN) | RESET | CONN-TH_3P-P2.50_B3B-XH-AM-LF-SN | 1 |
| 13 | 10K | RN1,RN2 | RES-ARRAY-SMD_0603-8P-L3.2-W1.6-BL | 2 |
| 14 | Switch,6*6*5Plastic head,260G, 0.25mm,Side foot | RST | SW-TH_BBJ6X6X5PH260G | 1 |
| 15 | AMS1117-3.3_C165482 | U1 | SOT-223_L6.5-W3.5-P2.30-LS7.0-BR | 1 |
| 16 | KF128L-3.5-3P | X1,X2 | CONN-TH_3P-P3.50_KF128L-3.5-3P | 2 |
Unfold
Project Members
1
2
Collect to album
Add to album
×
Loading...
reminder
×
Do you need to add this project to the album?