© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD RC - Controller (Upper)
Mode:
S1 FetchIncr
Open in EditorS3 SetABAlu
Open in EditorS5 Conns
Open in EditorS6 LEDs
Open in EditorS2 LoadStore
Open in EditorS4 IncXYPrt
Open in EditorID | Name | Designator | Footprint | Quantity | BOM_Manufacturer Part |
---|---|---|---|---|---|
1 | 1N4148 | D0,D1,D2,D3,D4,D5,D6,D7,D8,D9,D10,D11,D12,D13,D14,D15,D16,D17,D18,D19,D20,D21,D22,D23,D24,D25,D26,D27,D28,D29,D30,D31,D32,D33,D34,D35 | DO-35 | 36 | 1N4148 |
2 | G6S-2-12V | K0,K1,K2,K3,K4,K5,K6,K7,K8,K9,K10,K11,K12,K13,K14,K15,K16,K17,K18,K19,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29 | G6S-2-12V | 30 | G6S-2-12V |
3 | Interconnect A | J1 | HDR-TH_14P-P2.54-V | 1 | Female header 2.54-1*14P |
4 | Interconnect B | J2 | HDR-TH_14P-P2.54-V | 1 | Female header 2.54-1*14P |
5 | Interconnect C | J3 | HDR-TH_10PIN-V-FEMALE-PITCH2.54 | 1 | 2.54mm 1*10P Straight Female header Gold-plated |
6 | Interconnect D | J4 | HDR-TH_10PIN-V-FEMALE-PITCH2.54 | 1 | 2.54mm 1*10P Straight Female header Gold-plated |
7 | Interconnect E | J5 | H5-2.54 | 1 | F185-1105A0BSYA1 |
8 | Power Interconnect | J6 | HDR-3X1/2.54 | 1 | Header-Female-2.54_1x3 |
9 | Ground Interconnect | J7 | HDR-3X1/2.54 | 1 | Header-Female-2.54_1x3 |
10 | Power | P1 | HDR-IDC-2.54-2X5PW | 1 | IDC Box 2X5 2.54MM |
11 | A-Bus | P2 | HDR-IDC-2.54-2X8PW | 1 | IDC Box 2X8 2.54MM |
12 | OP-Bus | P3 | HDR-IDC-2.54-2X8PW | 1 | IDC Box 2X8 2.54MM |
13 | Pulse | P4 | HDR-IDC-2.54-2X10PW | 1 | IDC Box 2X10 2.54MM |
14 | Standard LEDs - Through Hole 3mm Thru Hole LED 625nm for 12VDC | I0,I1,I2,I3,I4,I5,I6,I7,I8,I9,I10 | LED-3MM | 11 | LEDOrange orange 3AO4UD |
Unfold
Loading...
Do you need to add this project to the album?