LTC2208_MODULE

LTC2208 Module for QMTech Zynq 7z020 board.

To use as cheap Red Pitaya analog as SDR receiver/transceiver with Pavel Demin code. 

More details - https://github.com/enthru/redQmtech_notes

Notes:

DO NOT solder R4,R6,R7,R8

You can add 0805 100R resistors bentween connector soldering points (between LVDS + and -) see the photo.

Also you may want to add 10R-30R resistor between ADC and Clock generator output scratching mask and cutting the line :) But 98% it wont improve anything if you'll use good generator.

Also it has anti-alias 50MHz LPF which is too high with 61.44 clock, consider re-calculate it. I was too lazy, also I'm using RF frontend with some filters.