© 2024 EasyEDA Some rights reserved ISO/IEC
Brand new interactions and interfaces
Smooth support for design sizes of over 3W
devices or 10W pads
More rigorous design constraints, more
standardized processes
For enterprises, more professional users
Easy to use and quick to get started
The process supports design scales of 300
devices or 1000 pads
Supports simple circuit simulation
For students, teachers, creators
STD ArduTest LED
Mode:
An Arduino based LED Tester with LCD. Select the current and the destination voltage (your battery), connect the LED to the tester and get the needed value for a serial connected Resistor. You can also see the measured values for the LED (forward voltage and current).
Based on the idea of https://jaycar.com.au
[EDIT] Sorry, the Sketch was for PCB version 0.1! The Sketch below is now the right one
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | Thump Wheel Pot | U3 | B103 | 1 |
2 | I Up | SW2 | 6X6 MM TACTILE SWITCH | 1 |
3 | I Down | SW3 | 6X6 MM TACTILE SWITCH | 1 |
4 | V Up | SW4 | 6X6 MM TACTILE SWITCH | 1 |
5 | V Down | SW5 | 6X6 MM TACTILE SWITCH | 1 |
6 | ARDUINO_NANO | U1 | ARDUINO_NANO | 1 |
7 | TOOGLES SWITCHES_UPIM | SW1 | 6 PIN PUSH SWITCH_UPIM | 1 |
8 | Terminal 5.08 | J1 | TERMINAL 5.08 | 1 |
9 | 9V | J2 | TERMINAL 5.08 | 1 |
10 | LCD-16X2 | U2 | LCD-16X2_NOHOLES | 1 |
11 | 470uF | C1 | CAP-D8.0XF3.5(1) | 1 |
12 | 10R | R1 | PR-D2.3XL6.5MM | 1 |
13 | 39R | R2 | PR-D2.3XL6.5MM | 1 |
14 | 220R | R3 | PR-D2.3XL6.5MM | 1 |
15 | 10k | R4,R5 | PR-D2.3XL6.5MM | 2 |
Unfold
Loading...
Do you need to add this project to the album?