© 2022 EasyEDA Some rights reserved
Editor Version
×
Standard
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
Profession
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 30,000 devices or 100,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Description
uController (v1.5)
An Arduino Nano driven CNC controller board for use with the popular Polulu A4988 stepper controller modules and bipolar stepper motors.
These are the schematic and board layouts for the controller board, please note that there may be a board file with the _fab file name, these contain the cleaned up silkscreen layers with added information, that is not part of the design board.
The uCNC_controller project repository can be found here: uCNC_Contoller on GitHub.
Also please check out my YouTube channel, views, likes, and comments really do make a difference.
Documents
| ID | Designator | Footprint | Quantity |
|---|---|---|---|
| 1 | R1,R2,R3 | 020710 | 3 |
| 2 | R4,R5,R6,R7 | 020710 | 4 |
| 3 | IC1 | TO220_VERT78XX | 1 |
| 4 | C1,C3,C4,C5 | TAP5-70 | 4 |
| 5 | C2 | TAP5-70 | 1 |
| 6 | SERVO,LASER,I/O1,I/O2,COM | MA03-1 | 5 |
| 7 | STEPPER3,STEPPER1,STEPPER2,SUPPLY | MA04-1 | 4 |
| 8 | R8 | 020710 | 1 |
| 9 | SWITCHES | MA03-2 | 1 |
| 10 | R9 | 020710 | 1 |
| 11 | LED1 | LED 3MM | 1 |
| 12 | R10 | 02075V | 1 |
| 13 | U1 | ARDUINO_NANO | 1 |
| 14 | U2,U3,U4 | A4988 STEPPER MOTOR DRIVER CARRIER | 3 |
| 15 | Q2 | TO-220AB | 1 |
Unfold
Project Members