© 2022 EasyEDA Some rights reserved
Editor Version
×
Standard
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
Profession
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 30,000 devices or 100,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Std EditionMega Das IOExtension Module copy
Project source： Cloned from Mega Das IOExtension Module
Description
The IOExtension module is based on four shift registers (74HC595) to provide 16 Digital Inputs and 16 Digital Outputs, you will need only four pins in your Dev Board to control the module, plus the Vcc and the Gnd pins.
The use of this module is so handy because the MEGA DAS community developed an Arduino software library to grant you using the module with a minimum code instructions.
Documents
| ID | Name | Designator | Footprint | Quantity |
|---|---|---|---|---|
| 1 | FIRST input register | U1 | DIP16 | 1 |
| 2 | FIRST output register | U3 | DIP16 | 1 |
| 3 | SECOND output register | U4 | DIP16 | 1 |
| 4 | 8-pin connector | U7,U8 | 1X08 | 2 |
| 5 | 8 digital outputs | U9,U10 | 1X08 | 2 |
| 6 | control connector | U13 | 4 CONNECTOR | 1 |
| 7 | POWER LED | D1 | LED3MM | 1 |
| 8 | power connector | U6 | 2 CONNECTOR V | 1 |
| 9 | 330 | R1 | R3 | 1 |
| 10 | SECOND input register | U2 | DIP16 | 1 |
Unfold
Project Members