L0-LA59-Nano

This is a simple undercarriage board for an Arduino Nano to support building micro-driods.  

It can support connections from the Nano to:

• up to 3 light weight servos
• DF-Player mini
• 3 or 4 wire programmable LEDs
• 2 analog I/O
• 1 digital I/O with inturrupt 

All the connectors are placed on the underside of the board so that it can be as small as possible.  If space constraints are very tight, then use low profile header pins and remove the plastic body of the pin headers after soldering in place.  This leave enough of the pin exposed to get a good connection, but saves about 1/8" of space.