ESP32 D1 Mini - WLED Controller 5-12V SR

Just a simple ESP8266 D1 mini / ESP32 D1 Mini compatible board for led control via WLED app,  based on SN74LVC2T45DCUR level shifter, with sound reactive capabilities. 

PLEASE BEWARE !!!

IMPUT VOLTAGE MUST MACH YOUR LED VOLTAGE !

Voltage Regulator is there only to provide 5V for the ESP8266 D1 mini/ ESP32 D1 Mini.

Please place a jumper into the 3 pin terminal according to your input voltage (5v or 12v). See the picture below.

There are two versions of PCBs. One with a KF301-2P connector and another one with a power jack connector.  Choose the one that fits your needs the best.

Keep in mind that "regular" power jack connectors can't handle to much current, so choose a power jack that can hande your project current draw needs.

★★★ You have to use an ICS-43434 / INMP441 microphone module to enable the sound reactive capabilities. ★★★

For more informations about WLED project, please visit project page : https://kno.wled.ge/, and don't forget to show your appreciation to Aircoookie for his awesome work !

Feel free to improve this design and show us your result ! 🙂