ELRS 2.4_GEMINI_500mw_with_TFT

This project is copied from https://oshwhub.com/alanalger/elrs-2-4_gemini_500mw

There is an on-board typec automatic download circuit, if you use the backpack function, you need to shorten R3 R4 pads.

Because the backpack uses esp32 tx and rx port, so after soldering the backpack, you can not use the typec to flash esp32, you can add your own dip switch to solve it.

The board is verified, but because of the lazimess, I used automatic wiring, pcb if only for reference, many places can still be optimized.