Your EasyEDA usage duration is brief. In order to avoid advertising information, this action is not supported at present. Please extend your EasyEDA usage duration and try again.
Editor Version×
Standard
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
Profession
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
![](https://user-images.githubusercontent.com/36605644/186671744-dc88d330-b454-46e5-a834-e3126cef4266.jpg)
## ✨ Welcome to the iNap Malinka main page! ✨
**iNap Malinka** was mostly made as a decent Raspberry Pi based NRF24L01 transmitter. But as it turns out you can play some games on this as well! It's a small DIY handheld that runs RetroPie so any retro game, including ports, can be played on Malinka. But as it's mostly a device for tinkering on-the-go, there's an additional USB for any kind of peripheral, an HDMI port, and a decent audio section too. Not only that, it's just as big as your phone, with only 12mm thickness. Two joysticks, 3.5" capacitive touch screen, powered by Raspberry Pi Zero 2W.
But, if you're interested just about gaming, you can totally ignore the radio section and use it as a small, DIY handheld! Formally it's a mobile Human-Machine Interface (HMI), as besides the NRF24L01 you can use WiFi and Bluetooth to control your devices!!
## ❤ Why Malinka?
* small and compact size
* big, colorful LCD with touch!
* two joysticks allowing more modern games to be played
* NRF24L01 radio makes it a perfect remote!!
* only 3 external ICs, **without** any aux microcontroller
* stereo sound output and a headphone jack
* custom overlay
* with a keyboard, it can act as a little PC
* uses parts from Nintendo Switch
## 💔 Why NOT?
* if you're a fan of Steam Deck, this device is probably too small for you
* lack of joystick pushbuttons as well as analog triggers
* many tools are needed for assembly
* intermediate soldering skills are needed
* uses parts from Nintendo Switch
## 🚀 Features
* 3.5" 480x320 ILI9488 screen with FT6236 capacitive touch controller
* Raspberry Pi Zero 2W
* 1500mAh lipo battery
* 160x70x12mm (with case)
* two joysticks with 10 bit ADC MCP3008
* PAM8403 amplifier, stereo
* NRF24L01 PA+LNA radio with external antenna (optional)
* Micro-USB for peripherals and USB-C for charging
## 🔨 Kits
There aren't any kits at the moment, you'll need to buy everything by yourself - please visit the [wiki](https://github.com/Leoneq/iNapMalinka/wiki)!
If you want to sell kits of Malinka, please contact me.
## ✏ To-do
* range test video
* sans gaming video
* doom gaming video
* radio demo video
* improve software a little bit
* and finish wiki ofc
## 😎 Find the project elsewhere
* [OSHWLab](https://oshwlab.com/leoneq/konsola) for schematics and PCB source
* [GitHub](https://https://github.com/Leoneq/iNapMalinka) for wiki and hardware source
* [Hackaday](https://hackaday.io/project/186233-inap-malinka) for fun
* [Thingiverse](https://www.thingiverse.com/thing:5426649) for 3D models
* instructables: not yet!
If the project becomes quite popular, I may create a discord server or subreddit dedicated to Malinka!
## 🤝 License
Licensed under CC BY-NC-SA 4.0 - that means you can share, contribute, modify, and remix the source as much as you want!
Please remember to mention the original author and dont change the license. If you want to use it commercially, contact me.
Remember that anything you do is on your own risk - the author **is not** responsible for anything you do. Good luck!!
[![Creative Commons License](https://i.creativecommons.org/l/by-nc-sa/4.0/88x31.png)](http://creativecommons.org/licenses/by-nc-sa/4.0/)
Because of licensing issues, the code has been moved to [iNapMalinka-code](https://github.com/Leoneq/iNapMalinka-code)!
## 💖 Sponsor
If you liked this project consider buying me a cup of milk:
[![Buy Me a milk cup at ko-fi.com](https://cdn.ko-fi.com/cdn/kofi3.png?v=3)](https://ko-fi.com/V7V2B5527)
I also want to thank [Leo the Leon](https://github.com/leo-the-leon) and [TheTrueShadowFox](https://github.com/TheTrueShadowFox) for the help with this project!!
made with ❤ and 🥛 by
[@leonek112](https://twitter.com/leoneq112)
Forked project will be set private in personal workspace. Do you continue?
Clone
Project
The Pro editor is about to be opened to save as. Do you want to continue?
private message
Send message to leoneq
Delete
Comment
Are you sure to delete the comment?
Report
iNap Malinka
A decent NRF24L01 remote that can also play pokemon.
Announcer: leonek
Creation time: 2022-05-15 17:33:25
Published time:
2024-01-30 19:55:21
*
Report type:
Please select report type
*
Report reason:
Please fill in the reason for your report and the content is 2-1000
words
*
Upload image:
+
Upload image
*
Email address:
Please fill in your email address
Report
*
Report type:
Please select report type
*
Report reason:
Please fill in the reason for your report and the content is 2-1000
words
*
Upload image:
+
Upload image
*
Email address:
Please fill in your email address
Report
Submitted successfully! The review result can be viewed in the personal
center, review notification.
Kind tips
Your EasyEDA usage duration is brief. In order to avoid advertising information, this action is
not supported at present. Please extend your EasyEDA usage duration and try again.
Share
Project
Copy
Copy
Scan the QR code and open it on the mobile terminal