OngoingElectra
STDElectra
License
：MIT
Description
Soon Electra will Power a Gazillion Devices
All you Need is Electra
ESP8266 12E 12F Touch SPI TFT
inbrowser install Electra touch
https://ldijkman.github.io/Electra
need a PCB to connect ESP8266 to SPI Touch TFT
for wemos, nodemcu etcetera 4nbyte 12E 12F
inbrowser install Electra touch
Warning Fiddling with Electra can Kill you!
Handle Electra with Care
ESP8266 Wemos, NodeMCU, Etcetera 12E 12F SPI Touch TFT connections
VCC == +5vdc from usb
GND == gnd
CS == D8
RESET == RST
DC/RS == D3
SDI(MOSI) == D7
SCK == D5
LED == +3.3vdc or PWM pin for backlight control
SDO(MISO) == not used Do not share on ILI9488
T_CLK == shared with SCK == D5
T_CS == D4
T_DIN == shared with SDI(MOSI) == D7
T_DO == D6
TIRQ == not used
D1, D2 free for i2c BME280 PCB module? D1=SCL, D2=SDA
D0 == GPIO16 for Relais PCB module
Soon Electra will Power a Gazillion Devices
All you Need is Electra
https://ldijkman.github.io/randomnerd_esp32_wifi_manager/Touch_Electra-Electra_Touch/
PCB Designs not tested yet
they are ordered and made but not arrived yet
Design Drawing
The preview image was not generated, please save it again in the editor.BOM
Bom empty
CloneProject Members
Intellectual Property Statement & Reproduction Instructions
This is an open-source hardware project. All intellectual property rights belong to the creator. The project is shared on the platform for learning, communication, and research only; any commercial use is prohibited. If your intellectual property rights are infringed on EasyEDA, please notify us by submitting relevant materials in accordance with the Rules for Complaints and Appeals of IPR Infringement.
Users must independently verify the circuit design and suitability when replicating this project. All risks and consequences are borne by the user, and the platform assumes no liability.
Empty
Comment