daplink-hs-ch32v305fbp6

This is a usb 2.0 jtag probe, that accepts voltages from 1.8V to 3.3V. The probe provides

- SWD

- JTAG

- UART serial

Use 

Connect VIO to target voltage supply, from 1.8V to 3.3V. The device will not work if VIO is not connected.

Works with openocd.  Use a command line similar to:

openocd -f scripts/interface/cmsis-dap.cfg -c 'transport select swd' -f scripts/target/stm32f1x.cfg

Firmware

Before first use, the firmware needs to be downloaded in the ch32v305 processor.

Download the attachment "DAPLink.zip". The firmware is in the directory "DAPLink/obj/". Use file DAPLink.hex or DAPLink.elf. Firmware begins at address 0x08000000.

Compilation

Use the software from XIVN1987.

To compile the firmware, use MounRiver Studio.

In MounRiver Studio, choose File -> Open Project From FIle System -> DAPLink/CH32V305/ 

Then Project -> Build All

The compiled project is in DAPLink/CH32V305/obj

The original project.