© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD Current sensor realy
License: GPL 3.0
Mode: Editors' pick
This circuit will turn on home theater receiver fan array when set current is reached. Tried to avoid fan noise while listaning at very low volumes. Compontent count and dificulty minimal Comments on improvement welcome.
ID | Name | Designator | Footprint | Quantity | Contributor | |
---|---|---|---|---|---|---|
1 | 330u | C1,C2 | CAP_16X25_P7.5 | 2 | jousterde1 | |
2 | 1N4148 | D1 | DIODE-1N4148 | 1 | jousterde1 | |
3 | 1N4001 | D2 | DIODE-1N4001 | 1 | jousterde1 | |
4 | JUMPER-HDR-2.54_1x3_2 | JP1 | HDR-3X1/2.54 | 1 | jousterde1 | |
5 | Relay-5V | K1 | HTD2-DC12V-SHG | 1 | jousterde1 | |
6 | GREEN | LED1 | LED-5MM | 1 | jousterde1 | |
7 | RED | LED2 | LED-5MM | 1 | jousterde1 | |
8 | AC PLUG | PWR | TERMINAL-3.5MM-2 | 1 | huang247 | |
9 | PN2907ATF | Q1 | TO-92-3_L4.9-W3.7-P1.27-L | 1 | LCSC | |
10 | 4.7k | R1 | RESISTOR-1/4-5 | 1 | jousterde1 | |
11 | 10k | R2,R6,R7,R9,R10,R12 | RESISTOR-1/4-5 | 6 | jousterde1 | |
12 | 33k | R3,R4 | RESISTOR-1/4-5 | 2 | jousterde1 | |
13 | 100k | R5,R8,RX | RESISTOR-1/4-5 | 3 | jousterde1 | |
14 | 1k | R11 | RESISTOR-1/4-5 | 1 | jousterde1 | |
15 | AC SOCKET | RECEIVER,TRIGG-OUT1,TRIGG-OUT2,TRIGG-OUT3 | TERMINAL-3.5MM-2 | 4 | huang247 | |
16 | ACS712 | U1 | ACS712-MODULE | 1 | jousterde1 | |
17 | AC-DC 5v | U3 | AC-DC2 | 1 | jousterde1 | |
18 | ACS758LCB | U4 | SENSOR-TH_ACS758LCB-050U-PFF-T | 1 | jousterde1 | |
19 | 10k | VR1 | RES-ADJ-TH_3296W | 1 | jousterde1 | |
20 | LM358N | U2,U5,U6,U7 | DIP8 | 4 | jousterde1 | 1 |
21 | 100k | VR1 | RES-ADJ-TH_3296W | 1 | jousterde1 |
Unfold
Loading...
Do you need to add this project to the album?