​Project Description: Blink LED with STM8S001J3​

​Overview​

This project demonstrates a simple ​LED blinking​ application using the ​STM8S001J3 microcontroller. The code is written in ​C​ and compiled using the ​STM8 toolchain​ (e.g., STVD or Cosmic Compiler). The LED toggles at a fixed delay, controlled by the microcontroller’s GPIO.

​Features​

✅ ​Simple Blink LED​ – Toggles an LED ON/OFF at a defined interval.

✅ ​STM8S001J3 GPIO Control​ – Uses ​Port B (PB5)​​ as the output pin.

✅ ​Adjustable Delay​ – Delay can be modified for faster/slower blinking.

✅ ​Low-Power Microcontroller​ – Efficient 8-bit STM8 MCU for basic embedded tasks.

​Hardware Components​

• •

  ​Microcontroller:​​ STM8S001J3 (TSSOP-20 package)

• •

  ​LED:​​ Standard 5mm LED (e.g., Red/Green/Blue)

• •

  ​Resistor:​​ 220Ω (current-limiting resistor for LED)

• •

  ​Power Supply:​​ 3.3V or 5V (STM8S001J3 operates at 2.95V–5.5V)

• •

  ​Breadboard & Jumper Wires​ (for prototyping)

​Software & Tools​

• •

  ​IDE:​​ ST Visual Develop (STVD) / IAR Embedded Workbench / Cosmic Compiler

• •

  ​Programming:​​ ST-Link V2 (or compatible programmer)

• •

  ​Code:​​ Written in ​C​ using STM8 Standard Peripheral Library (or bare-metal register access)