Single Cell Module Public

This is my LattePanda Mu carrier board, this is my second carrier of have made. This is a test cell for another project I plan on creating. I went with a smaller platform to help save cost. This features two PCIE 1x and one PCIE 4x. USB 3.0 and 2.0, two HDMI. There is also one I2c and one UART. The PCI slots are spaced according to the spacing on normal ATX style motherboards. In the picture is does have onboard Ethernet and I did originally have PCIE based ethernet controller but my schematic was wrong for that section of the board. I did end up deleting it from the schematic in this public release to ensure no one damages any of their devices if they try to build this. This uses a standard 24 pin motherboard power supply with a CPU 4 pin for more juice on the PCIE. Something that does need adjustment is the fan, the fan is supposed to only run is the LattePanda Mu is on, but as of right now the fan is always on when the device is powered off, so that needs to be fixed as well.

Please take this and enjoy!!!