© 2022 EasyEDA Some rights reserved
Editor Version
×
Standard
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
Profession
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 30,000 devices or 100,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Std EditionPicoFlight
Profile：This project is about creating an ecosystem of flight controllers based on RP2040.
License: LGPL
Description
This project is about creating an ecosystem of flight controllers based on RP2040.
This project is about creating an ecosystem of flight controllers based on RP2040.
It should be easy to assemble and be relatively powerful.
Documents
Sheet_1
Open in editor
PCB_PicoFlight
Open in editor
PCB_PicoFlight_2
Open in editor
PCB_PicoFlight_3
Open in editor| ID | Name | Designator | Footprint | Quantity |
|---|---|---|---|---|
| 1 | 3.3V | 3.3V | 1X5 | 1 |
| 2 | 5V | 5V | 1X5 | 1 |
| 3 | MYPOWERPIN | +,- | POWERPIN | 2 |
| 4 | 1u | C1,C2,C3,C4,C5 | CASE-A_3216 | 5 |
| 5 | 0.1u | C6 | C0603 | 1 |
| 6 | XT30UPB-M | CN1 | CONN-TH_XT30UPB-M | 1 |
| 7 | B330B-13-F | D1,D2 | SMB_L4.6-W3.6-LS5.3-RD | 2 |
| 8 | BZX84C6V2-7-F | D3 | SOT-23_L2.9-W1.3-P1.90-LS2.4-BR | 1 |
| 9 | GND pins | GND | 1X5 | 1 |
| 10 | 1X8 | GPIO0,GPIO1 | 1X8 | 2 |
| 11 | I2C Port | I2C0,I2C1 | PINS 4 | 2 |
| 12 | VCC out | J1 | HDR-M-2.54_1X1 | 1 |
| 13 | GND out | J2 | HDR-M-2.54_1X1 | 1 |
| 14 | 5V in | J3 | HDR-M-2.54_1X1 | 1 |
| 15 | GND in | J4 | HDR-M-2.54_1X1 | 1 |
| 16 | ESC | J5 | HDR-M-2.54_1X1 | 1 |
| 17 | LED-0603_R | LED1,LED2,LED3 | LED0603_RED | 3 |
| 18 | 1k | R1,R2,R3,R4 | R0603 | 4 |
| 19 | 4k | R5 | R0603 | 1 |
| 20 | ServoPins | SERVO1,SERVO2 | SERVOPINS | 2 |
| 21 | RASPBERRY-PI-PICO | U1 | RASPBERRY-PI-PICO | 1 |
| 22 | UART4PIN | UART0,UART1 | UART4PIN | 2 |
| 23 | VCC | VCC | 1X5 | 1 |
Unfold
Project Members