OngoingRC_2561_Pro_mini
STDRC_2561_Pro_mini
License
：Public Domain
Description
Needed some extra power or pins for your RC project and ATmega328 is too small and Mega2560 is too big, RC_2561_Pro_mini is the answer. Ports A through F have standard 3 pin servo pin out that can be used for output or input. Power can be directed from onboard voltage regulator or from external source or disabled all together and just signal and ground being active with additional G port pins a total of 54 pints.
Features ISP and UART ports for programming.
Board can faciliate ATmega 64 / 128 / 1281 / 2561 microcontrollers
Design Drawing
The preview image was not generated, please save it again in the editor.BOM
Bom empty
CloneProject Members
Intellectual Property Statement & Reproduction Instructions
This is an open-source hardware project. All intellectual property rights belong to the creator. The project is shared on the platform for learning, communication, and research only; any commercial use is prohibited. If your intellectual property rights are infringed on EasyEDA, please notify us by submitting relevant materials in accordance with the Rules for Complaints and Appeals of IPR Infringement.
Users must independently verify the circuit design and suitability when replicating this project. All risks and consequences are borne by the user, and the platform assumes no liability.
Empty
Comment