© 2024 EasyEDA Some rights reserved ISO/IEC
Brand new interactions and interfaces
Smooth support for design sizes of over 3W
devices or 10W pads
More rigorous design constraints, more
standardized processes
For enterprises, more professional users
Easy to use and quick to get started
The process supports design scales of 300
devices or 1000 pads
Supports simple circuit simulation
For students, teachers, creators
STD ATmega 64/128/12812561 AT90CAN 32/64/128 Break-out board
Mode:
Break out board for ATmega 64/128/1281/2561 and AT90CAN 32/64/128 microcontrollers. Will also work with AT90USB microcontrolelrs. Some passive components will need to be removed or added from the board based on family of the controller
Onboard jumpers AVcc and Aref options, One power LED and status LED connected to PB5.
ICSP and FTDI programming ports. 2 crystal oscilator provisions, one main and one 32KHz clocks
ATmega 2561 Brake-out
Open in EditorATmega 2561 Brake-out r1.01
Open in EditorATmega 2561 Brake-out r1.02
Open in EditorID | Name | Designator | Quantity | |
---|---|---|---|---|
1 | HDR-2X5 / 2.54 | JTAG | 1 | |
2 | _ | IOL1,IOL2,IOL3,IOL4,IOL5,IOL6,IOL7,IOL8 | 8 | |
3 | LED1206-RD | PWR,LED1,LED2 | 3 | |
4 | HEADER 6 PIN | FTDI | 1 | |
5 | TQFP-64_14X14X08P | U1 | 1 | |
6 | _ | ICSP | 1 | |
7 | _ | Y1 | 1 | |
8 | _ | RESET | 1 | |
9 | HDR-3X1/2.54 | AREF_SEL,AVCC_SEL | 2 | |
10 | Closed for 5V Board | SJ1 | 1 | |
11 | 0805 | C1,C2,C3,C4,C5,C6,C7,C8,C9,C10,C11,R1,R2,R3,R4,R5,R6 | 17 | |
12 | 1206T | C12,C13 | 2 |
Unfold
Loading...
Do you need to add this project to the album?