LU-MOD track circuit block box in rear multivolt high current

Circuit card for connecting modular model railways depicting the London Underground built to the LU-MOD standard.

    • Plug in an 8-pin mini-DIN cable to connect to the module in front
    • Connect a compatible local block occupancy detector if your signal is not at the edge of your module (compatible with more types of block occupancy detector than the 5v version)
    • Select between controlled and automatic signal operation 
    • Connect to your signalling system if the last signal on your module needs to be a controlled signal
    • Will power and control the last signal on your module (including a feather if applicable) before the next module from the module in front (with anything up to 24v)

    • Each output can draw up to 1A

    • Will power and control a repeater for the signal on the next module (with anything up to 24v)
    • Requires 1x power supply of up to 24v as used by your local signals
    • Size: 100mm x 100mm