LU-MOD track circuit block box in front multivolt

Circuit card for connecting modular model railways depicting the London Underground built to the LU-MOD standard.

• Plug in an 8-pin mini-DIN cable to connect to the module in rear
• Connect a compatible block occupancy detector (e.g. the Digitrax BD4N) to operate the last signal on the module in rear

  (compatible with more types of block occupancy detector than the 5v version)

• Connect the next signal’s green aspect to operate repeaters on the module in rear (your signals can be powered by up to 24v)
• Connect to your signalling system if the last signal on the module in rear needs to be controlled
• Requires 1x USB-C 5v power supply and 1x power supply up to 24v as used by your signals
• Size: 100mm x 100mm