© 2022 EasyEDA Some rights reserved
Editor Version
×
Standard
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
Profession
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 30,000 devices or 100,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Std Editionmini smart relay switch with 2 input of output
License: Public Domain
Description
esphome config esphome: name: smart_1 platform: ESP8266 board: esp01_1m
wifi: ssid: "wifi" password: "pass"
Enable fallback hotspot (captive portal) in case wifi connection fails
ap: ssid: "Smart 1 Fallback Hotspot" password: "gtyeds4et57sz"
captive_portal:
Enable logging
logger:
Enable Home Assistant API
api: password: "pps" ota: password: "pps"
binary_sensor:
-
platform: gpio pin: number: GPIO0 mode: INPUT_PULLUP inverted: true name: "Office Wall Switch" on_press:
- switch.toggle: relay1
- switch.toggle: relay2
-
platform: gpio pin: number: GPIO12 mode: INPUT_PULLUP inverted: True name: "smart-s1" on_press:
- switch.toggle: relay1 on_release:
- switch.toggle: relay1
-
platform: gpio pin: number: GPIO13 mode: INPUT_PULLUP inverted: True name: "smart-s2" on_press:
- switch.toggle: relay2 on_release:
- switch.toggle: relay2
switch:
-
platform: gpio name: "smart-r1" pin: GPIO16 id: relay1
-
platform: gpio name: "smart-r2" pin: GPIO14 id: relay2
status_led: pin: number: GPIO02 inverted: true
Documents
| ID | Name | Designator | Footprint | Quantity |
|---|---|---|---|---|
| 1 | 2.4 GHz PCB Antenna | ANT1 | PCB ANTENA 2.4GHZ | 1 |
| 2 | 10pF | C1,C3 | C0603 | 2 |
| 3 | 5.6pF | C2 | C0603 | 1 |
| 4 | 1uF | C4 | C0603 | 1 |
| 5 | 100nF | C5 | C0603 | 1 |
| 6 | 10uF | C6 | C0805 | 1 |
| 7 | 1N4001 | D1,D2 | SEEED-DO-214AC | 2 |
| 8 | Header-Male-2.54_1x4 | H1 | DIP-1X4P-2.54MM-M | 1 |
| 9 | HDR-M-2.54_1x3 | J1 | HDR-M-2.54_1X3 | 1 |
| 10 | HK4100F-DC3V-SHG | K3,K4 | HK4100F-DC3V-SHG | 2 |
| 11 | IO2 blue | LED1_BLUE | LED-1206F | 1 |
| 12 | red TX/1 | LED2_RED | LED-1206F | 1 |
| 13 | 12K | R1,R2,R3 | R0603 | 3 |
| 14 | 200 | R4 | R0603 | 1 |
| 15 | 620 | R5 | 1206 | 1 |
| 16 | 330 | R6,R8 | 0603 | 2 |
| 17 | 300 | R7 | 1206 | 1 |
| 18 | Transistor NPN 2N2222 | T1,T2 | NPN_SOT23 | 2 |
| 19 | 2.4GHz | U1 | QFN-32_L5.0-W5.0-P0.50-TL-EP | 1 |
| 20 | W25Q32JVSSIQ_C179173 | U2 | SOIC-8_L5.3-W5.3-P1.27-LS8.0-BL | 1 |
| 21 | KF15EDG-3.5_8p | U3 | KF15EDG-3.5_8P | 1 |
| 22 | KLS7-TS6601 | U4 | KLS7-TS6601 | 1 |
| 23 | AMS1117 | U5 | SOT223 | 1 |
| 24 | HLK-PM01 | U7 | HLK-PM01 | 1 |
| 25 | 26MHz | X1 | OSC-SMD_4P-L3.2-W2.5-BL | 1 |
Unfold
Project Members