© 2022 EasyEDA Some rights reserved
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 30,000 devices or 100,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Std EditionMagnavox Odyssey 2 RGB unclked
License: CC-BY-SA 3.0
Refer to https://i.imgur.com/HVM4GNX.png for the O-Scope pulls. Oddly the output from the thing was 5.2ish volts I dont remember. I need to replace my 7805 and test again. The numbers are what I was shooting for whether they are "correct" or not IDK but this board works.
Compare the capture to http://tinyurl.com/y3p72nsh to see that yes it is pretty correct. Also compare the pallet vs what the simulated values should be: https://i.imgur.com/jDI5BGX.png
Screenshots coming soon but I have been playing on this circuit for a long time so I already know its working. After ordering these specific values I will actually make a how to.
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | 0.1uF | C1,C7 | C0603 | 2 |
2 | 220u | C2,C4,C5 | C1411 WITH JUMPER | 3 |
3 | 0.1u | C3 | C0603 | 1 |
4 | EXPHEAD | J1 | EXPANSION HEADER | 1 |
5 | O2 612160 HEADER | J2 | O2 - 612160 HEADER | 1 |
6 | GND | J3 | HDR-M-2.54_1X1 | 1 |
7 | 5V | J4 | HDR-M-2.54_1X1 | 1 |
8 | LPFON | JP3 | SJ_2S | 1 |
9 | SYNC | P1 | HDR-1X1/2.54 | 1 |
10 | GREEN | P2 | HDR-1X1/2.54 | 1 |
11 | BLUE | P3 | HDR-1X1/2.54 | 1 |
12 | RED | P4 | HDR-1X1/2.54 | 1 |
13 | 300 | R1,R3 | R0603 | 2 |
14 | 280 | R4,R5,R6,R19 | R0603 | 4 |
15 | 75 | R8,R10,R12 | R0603 | 3 |
16 | 6K | R13,R23,R26 | R0603 | 3 |
17 | 10k | R17 | R0603 | 1 |
18 | 2.4K | R22,R24,R25 | R0603 | 3 |
19 | 74VHCT541AFT(BE) | U2 | TSSOP-20 | 1 |
20 | NC7ST04M5 | U3 | SOT-23-5 | 1 |
21 | THS7374IPW | U4 | TSSOP-14 | 1 |
Unfold