[STM32] GameToy console ver1.0

## Project Brief Introduction This project is based on STM32F103C8T6 game console, all functions can be used normally, using JLC color silkscreen board. ## Project parameters You can fill in the relevant function parameters of the project here, for example: * Use STM32F103C8T6 die to save the overall volume. * Left and right double sticks, four buttons as input. * Uses a 0.96-inch OLED screen. * There are two custom LED lights and a buzzer as a game message prompt. ## Software code The software code is open source for others, and if you need it, you can go to the official account "JL MCU" to get it. ## Precautions * After soldering the power part, test whether the voltage at the test point is normal, and then solder the MCU if it is normal. * You can buy a PS4 joystick for the joystick, and try to choose the version with automatic reset. * The four holes of the screen can be fixed with an 11mm long M2 copper post. * TypeC only serves as a power supply, and the serial port function will be added in Ver1.1. ## Physical drawing