Your EasyEDA usage duration is brief. In order to avoid advertising information, this action is not supported at present. Please extend your EasyEDA usage duration and try again.
Editor Version×
recommended
Pro Edition
Brand new interactions and interfaces
Smooth support for design sizes of over 3W
devices or 10W pads
More rigorous design constraints, more
standardized processes
For enterprises, more professional users
Std Edition
Easy to use and quick to get started
The process supports design scales of 300
devices or 1000 pads
Supports simple circuit simulation
For students, teachers, creators
Completed
PRO
High-speed USB3.0 shareer Four in four out Select HUB+ switcher
High-speed USB3.0 shareer Four in four out Select HUB+ switcher
##### Bilibili video:[https://www.bilibili.com/video/BV11D4y1s7so](https://www.bilibili.com/video/BV11D4y1s7so)
# 1. Introduction
Function: When multiple USB3.0 or USB2.0 devices need to switch between different devices frequently, this project can quickly switch between different USB mount devices.
Similar product: USB raffer, this product is a USB device shared by four computers.
![image.png](//image.lceda.cn/pullimage/4jfiXq5kCsSTng1WPhxWfMYZJx0ErZNl2aiEhpMo.png)
* * *
For example, A, B, C, and D are connected to the switch using USB-A to TYPE-C, and the USB device is mounted with a mouse, keyboard, and large-capacity USB storage device. When the switcher switches to computer A, the mouse, keyboard, and large-capacity USB storage device mounted on the USB device will be connected to computer A, and other computers will not be connected. When you need to switch the computer to use, you don't need to pull out the mouse, keyboard, and large-capacity USB storage device mounted on the device in USB, you only need to safely eject the large-capacity USB storage device in computer A and press the switch button in the switcher button to switch to computer B, and the mouse, keyboard, and large-capacity USB storage device mounted on the device in USB are all reconnected to computer B, disconnected from computer A, saving the trouble of unplugging and unplugging the USB mounting device.
* * *
Application: A set of mouse and keyboard peripherals, camera, microphone, high-speed USB, mobile hard disk, etc., using multiple computer devices, such as: desktop + notebook + Raspberry Pi development board + game console, etc
* * *
Principle:
The TYPE-C USB3.0 interface is used to communicate with the host. Through the VL160, the TYPE-C USB3.0 is converted into the ordinary 2 high-speed differential USB3.0 signal, and the 2.0 signal on TYPE-C is combined to form the ordinary USB3.0 signal.
Switch four types of USB3.0 high-speed signals from TYPE-C USB3.0 to the VL822 USB3.0 HUB chip through the CH484M high-speed switch.
The VL822 extends 4 USB 3.0 signals to external devices.
* * *
I have made USB 2.0 switchers before, which are more suitable for low-speed devices such as keyboards and mice.
Link:[https://oshwhub.com/Aknice/e3a68120fa8d49ff8bc50ad21d57ec9d](https://oshwhub.com/Aknice/e3a68120fa8d49ff8bc50ad21d57ec9d)
![1.jpg](//image.lceda.cn/pullimage/hV1wqzhQTPtV7hsQAvq8q89Ny7j1qxtLcabKdXfc.jpeg)
![2.jpg](//image.lceda.cn/pullimage/fcUz9wmkrYIEuL3HNox0eKlAOLQ8MDOVZnnyuiWX.jpeg)
![IMG_2769.JPG](//image.lceda.cn/pullimage/svbHZfOHR7ivckG2kUap6USbxGpXmNBSIMqtkGmy.jpeg)
# 2. Block diagram
![image.png](//image.lceda.cn/pullimage/rKXyZLjqd3lBmPlXQydzxuCOh9Xo0QWTlOL9YT3n.png)
# 3. Actual measurement
TYPE-C line needs to use USB3.0 TYPE-C, ordinary TYPE-C line can only run 2.0 speed.
![-4871da9e5140249b.jpg](//image.lceda.cn/pullimage/F0KJlhIgafkWFWRio47ttuyPKo2kkvV6aX2PDFid.jpeg)
There is currently no better high-speed equipment on hand, so only so fast.
# 4. Shell
Screwless snap-on design.
![image.png](//image.lceda.cn/pullimage/H4eSZ1cS7LnStlHJJ1kuPLVobVXRk5miYPBg5yXu.png)
# 5. Summary
Purely hardware controlled, the chips are QFN to test the welding level.
Modification suggestion: It is recommended to use differential for USB high-speed signal, and do 90 ohm impedance matching.
**The thickness of the plate should be 1.0, and the actual adjustment is based on the thickness of the splint TYPE-C, and the general splint is 1.0 or 0.8.**
Forked project will be set private in personal workspace. Do you continue?
Clone
Project
The Pro editor is about to be opened to save as. Do you want to continue?
private message
Send message to hawaii0707
Delete
Comment
Are you sure to delete the comment?
Report
High-speed USB3.0 shareer Four in four out Select HUB+ switcher
No Profile
Announcer: OSHWlab@Hawaii
Creation time: 2024-11-27 03:43:46
Published time:
2024-11-29 03:03:39
*
Report type:
Please select report type
*
Report reason:
Please fill in the reason for your report and the content is 2-1000
words
*
Upload image:
+
Upload image
*
Email address:
Please fill in your email address
Report
*
Report type:
Please select report type
*
Report reason:
Please fill in the reason for your report and the content is 2-1000
words
*
Upload image:
+
Upload image
*
Email address:
Please fill in your email address
Report
Submitted successfully! The review result can be viewed in the personal
center, review notification.
Kind tips
Your EasyEDA usage duration is brief. In order to avoid advertising information, this action is
not supported at present. Please extend your EasyEDA usage duration and try again.
Share
Project
Copy
Scan the QR code and open it on the mobile terminal