© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD Annealer_nano
License: Public Domain
Mode: Editors' pick
PCB for DIY Annealer with Arduino Nano and TCM Stepper drivers
This PCB can be used to build a DIY brass annealer. It uses TMC based driver boards for stepper control. Headers for servo, buttons, fan, SSR are available. Jumpers define if external 5V is provided and what pin is being used for the TMC serial communication.
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | SCREW_TERMINAL_1x03 | 1WIRE | SCREW_TERMINAL_1X03 | 1 |
2 | Screw_Terminal_1x02 | +5V,+12V | SCREWTERMINAL-3.5MM-2 | 2 |
3 | Header-Male-2.54_1x3 | A7,CURRENT,SERVO,UART-SEL,VIN-VCC | HDR-3X1/2.54 | 5 |
4 | M04SCREW | ANNEALER,FAN,LED,STEPPER | SCREWTERMINAL-3.5MM-4 | 4 |
5 | Header-Male-2.54_1x8 | BUTTONS | 210S-1X8P | 1 |
6 | 100u | C1 | CAP-D8.0-F3.5 | 1 |
7 | SCHOTTKY-DIODECB417-15 | D2 | SCHOTTKY_D1 | 1 |
8 | 1N4007FFG | D4,D5,D6 | 1N4007 | 3 |
9 | I2C Display | I2C | HDR-4X1/2.54 | 1 |
10 | IRFZ44N | Q4,Q5,Q6 | TO-220AB | 3 |
11 | 220 | R1,R2,R10,R11,R13 | AXIAL-0.3 | 5 |
12 | 4k7 | R3 | AXIAL-0.3 | 1 |
13 | 1k | R4 | AXIAL-0.3 | 1 |
14 | 10K | R9,R12,R14 | AXIAL-0.3 | 3 |
15 | Motor Driver | TMC2208_1 | TCM2208 | 1 |
16 | Arduino Nano | X1 | ARDUINO-NANO-V3 | 1 |
Unfold
Loading...
Do you need to add this project to the album?