milwaukee fhir38 trigger board

repair pcb for milwaukee m12 fhir38 triggers that suffer from intermediate trigger problems and wear

use 0402 resistors, 330ohms each.

order in 1mm thickness with ENIG finish

in case your wiper also is worn down you can replace it :

the wiper itself is made from 0.1mm beryllium bronze, laser cut.

dxf can be found here (save as, name it filename.dxf)

https://pastebin.com/raw/dX4LMD9h

(need a 20..30W fiber laser to cut it out, scissors may work too if you are patient)