© 2022 EasyEDA Some rights reserved
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 30,000 devices or 100,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Std EditionDemonstrating the EasyEDA LM386 spice subckt model
License: Public Domain
A comparison between the EasyEDA LM386 improved spice model and the "NO-FRILLS LM386 MODEL" by Dave Dilatush 5/30/95.
The EasyEDA LM386EE/NJM386EE spice subcircuit model is a new model developed for EasyEDA by signality.co.uk
The LM386EE subcircuit is featured in the Tesseract Guitar Practice Amplifier simulation files:
https://easyeda.com/example/Tesseract_Guitar_Practice_Amp_simulation_files-H0ca8IFDB
To copy the subckt netlist, open the schematic in the editor and do:
File > Export Netlist > LTspice for This Sheet...
or simply download a copy of the LM386EE.sub.txt attachment.
The subckt is based on the schematic shown in the NJM386 datasheet:
https://www.nisshinbo-microdevices.co.jp/en/pdf/old_pdf/NJM386_E.pdf (or: https://cdn.datasheetspdf.com/pdf-down/N/J/M/NJM386_NewJapanRadio.pdf)
Specifications are based on the above and:
The EasyEDA spice subcircuit offers improved modelling of output voltage self-centring, typical quiescent and input bias currents and unloaded bandwidth.
Output swing is optimistic with < 8 Ohm load resistances although the reason for this is unclear.
To help improve the model in this area, if anyone is willing to share scope traces of the LM386 output voltage driving into clipping with loads of between 4 - 16 Ohms, please contact:
support@easyeda.com
Demonstrating the EasyEDA LM386 spice subckt model
Open in editorA high gain bandpass filter
Open in editorID | Designator | Footprint | Quantity |
---|---|---|---|
1 | C1 | 1206 | 1 |
2 | C2 | CP_8X13MM | 1 |
3 | C3,C1 | CP_8X13MM | 2 |
4 | C4,C5 | 1206 | 2 |
5 | L1 | INDUCTOR-1206 | 1 |
6 | R1 | R3 | 1 |
7 | R2 | R3 | 1 |
8 | RFB | R3 | 1 |
9 | RLOAD | R3 | 1 |
10 | RV1 | R3 | 1 |
11 | U1 | DIP | 1 |
12 | V1 | 2P-5.0 | 1 |
13 | V2 | 2P-5.0 | 1 |
14 | C2 | 1206 | 1 |
15 | C3 | CP_8X13MM | 1 |
16 | R1 | R3 | 1 |
17 | R2 | R3 | 1 |
18 | R3 | R3 | 1 |
19 | RSPKR | 1X02 | 1 |
20 | RVOL | RES-ADJ_3386P | 1 |
21 | V1 | 2P-5.0 | 1 |
22 | V_AMMETER | 2P-5.0 | 1 |
Unfold