
Mushsynth-8 (1.2 ver)
STDMushsynth-8 (1.2 ver)
License
:TAPR Open Hardware License
Description
I have created a fully analog polyphonic drone synthesizer and would like to share it with you. This is an 8-voice polyphonic synthesizer with a touch keyboard.
You can build it yourself by getting all the necessary files for this on my github:
https://github.com/EugeneCarlo/Mushsy...
I purposely used very affordable and inexpensive components to create it.
Each voice is a monophonic subtractive synthesizer, parallelly combined into a common low-pass filter and has on board:
- An oscillator with adjustable pitch and switchable waveform (Triangle/Square)
- An LFO with speed and depth controls to modulate the pitch of the oscillator.
- An envelope generator with attack and decay speed adjustments to control the VCA.
- Individual volume control for each voice.
- To control the envelope generator, capacitive sensors are used, which can operate in two modes (hold or momentary).
Eight such voices are combined into a single low-pass filter and delay. I have also added an independent knob for adding white noise.
Each voice can be controlled by CV/GATE which is set to each voice.
Technicial Specifications:
- 8 Polyphony
- 8 Analog VCO
- 2 Waveforms VCO
- 8 Analog LFO (Speed/Depth)
- 8 Analog Envelope (Attack/Decay)
- 8 Analog VCA
- 8 Channel Mixer
- 8 Sensor touch panel
- 1 White noise generator
- 1 Analog LP Filter
- 1 Delay PT2399
- 8 CV inputs
- 8 GATE inputs
- Can work with adapter 9V
- Mono Output (6.3mm jack)
- Circuit banding area (bread board)
My social media links:
https://github.com/EugeneCarlo
https://t.me/sborkasobaka (Chat where we communicate in Russian)
Donations:
Design Drawing

BOM


Project Members

Comment