© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD WLED_WT32-ETH01 V2.2
Mode:
NO SMD components
C6 = wled.discourse.group/t/wt32-eth01-hangs-on-boot-after-psu-power-up/2937/4
That gave me the idea to simply connect a capacitor between EN and GND which effectively delays the time to reset on boot. That actually helped. I ended up using a 470uF cap, 100uF did not seem to be enough. There is a very noticeable delay, maybe 1.5 - 2 sec and the boards boots just fine, no matter what I do with the PSU on mains side.
Loading...
Do you need to add this project to the album?