© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD ESP32-ETH01 Carrier Teich v7
License: TAPR Open Hardware License
Mode: Editors' pick
Unfortunately, the first published version had an error, as IO ports were incorrectly specified on the internet and in the manufacturer's technical description.
These have been corrected in this version.
The board is intended as a multifunctional board. It has 4 ports each for input and output, the programming interface, 2 temperature ports, which you can also use elsewhere because you can switch off the resistors, and an I2C interface.
The capacitors can, but do not have to be installed.
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | WAGO_250-402 | 5V,DC-DA,DC-DI | WAGO_250-402 | 3 |
2 | 470uF | C1 | CAP-TH_BD6.3-P2.50-D1.0-FD | 1 |
3 | 47uF | C2 | CAP-SMD_L3.5-W2.8-R-RD | 1 |
4 | 100nF | C3,C4 | CAP-TH_L7.2-W2.5-P5.00-D0.6 | 2 |
5 | WAGO_250-408 | DI1-4,RELAY1-4 | WAGO_250-408 | 2 |
6 | PTF-77 | F1 | FUSE-TH_L24.4-W9.4-P22.60 | 1 |
7 | 77311-102-03LF | J1,J2,J4,J5 | HDR-TH_3P-P2.54-V-M-1 | 4 |
8 | Prog | J3 | HDR-M-2.54_1X6 | 1 |
9 | I2C | J6 | HDR-M-2.54_1X6 | 1 |
10 | 15-21SYGC/S530-E2/TR8 | LED1,LED2,LED3,LED4,POWER | LED1206-R-RD | 5 |
11 | 1K | R1,R2,R3,R4,R7 | R1206 | 5 |
12 | 4.7K | R5,R6 | R1206 | 2 |
13 | 10K | R8,R10,R11,R12 | R0805 | 4 |
14 | Temp1 | TEMP1 | WAGO_250-403 | 1 |
15 | Temp2 | TEMP2 | WAGO_250-403 | 1 |
16 | TLP292(GB-TPL,E | U1-U4,U2,U3,U4 | SOP-4_L4.4-W2.8-P1.27-LS7.0-BR | 4 |
17 | ULN2004G-S16-R | U5 | SOP-16_L10.0-W3.9-P1.27-LS6.0-BL | 1 |
18 | WT32-ETH01 | U6 | WT32-ETH01 | 1 |
Unfold
Loading...
Do you need to add this project to the album?