© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD uno 328 pu and l239d
Mode:
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | ATMEGA328P_PDIP | U1 | DIP28-300 | 1 |
2 | 10k | R1 | AXIAL-0.3 | 1 |
3 | 22pF | C1,C2 | RAD-0.1 | 2 |
4 | 16MHz | Y1 | HC49US | 1 |
5 | Bluetooth Module 6x1 Header | JP1 | BLUETOOTH MODULE 6X1 HEADER | 1 |
6 | Reset BT | K1 | SW4-6.0X6.0X5.0MM | 1 |
7 | VCC 5v | JP2 | 1X02_2.54_SCREWTERM | 1 |
8 | 10μF | C3 | CAP-D3.0XF1.5 | 1 |
9 | Serial programming header | JP3 | B5B-PH-K-S | 1 |
10 | L293DNE | U2,U3 | DIP16-2.54-19.2X7.62MM | 2 |
11 | CON_HEADER_1X03-PTH | J1,J2,SERVO | M1X3 | 3 |
12 | VCC2 | JP4 | 1X02_2.54_SCREWTERM | 1 |
13 | MotorB | JP5 | 1X02_2.54_SCREWTERM | 1 |
14 | MotorD | JP6 | 1X02_2.54_SCREWTERM | 1 |
15 | MotorA | JP7,JP8 | 1X02_2.54_SCREWTERM | 2 |
16 | BUZZER | SG1 | BUZZER-12MM | 1 |
17 | G I/O | J3,J4 | M1X2 | 2 |
18 | G AI/O | J5 | M1X2 | 1 |
19 | CON_HEADER_1X01-PTH | J6,J7 | M1X1 | 2 |
20 | ATMEGA328P-PU | U1,U5 | DIP-28_300MIL | 2 |
21 | 10KOHM-1_4W-1%(PTH)HORIZ | R1,R2 | AXIAL-0.3 | 2 |
22 | 22PF-50V-5%(0603) | C1,C2,C5,C6 | 0603-CAP | 4 |
23 | 10UF | C3,C4 | CAP-D5.0XF2.0 | 2 |
24 | HC-49US 16.000MHz | Y1,Y2 | HC49US | 2 |
25 | L239D | U4 | DIP16 | 1 |
Unfold
Loading...
Do you need to add this project to the album?