OngoingUSB_Hub_4_Port_With_Ethernet
PROUSB_Hub_4_Port_With_Ethernet
License
：CC BY-SA 4.0
Description
Still a work in progress as a part of the weekly PCB design challange. Images are also just of WIP.
A 4 port USB 2.0 hub with 10/100 Ethernet. 2x USB A, 1xUSB C and an SD card reader as downstream ports. For upstream I chose USB C, which *can* power the board and simple low power devices, but for full 4x500mA capability on the outgoing USB ports, another USB C port is added, PD capable and works with non PD chargers. 5V, 3A should be fine.
Will try to find an enclosure to fit this in.Testing how this enclosure will work with the PCB size: Hammond 1593ARBK
Design Drawing
The preview image was not generated, please save it again in the editor.BOM
Bom empty
CloneProject Members
Intellectual Property Statement & Reproduction Instructions
This is an open-source hardware project. All intellectual property rights belong to the creator. The project is shared on the platform for learning, communication, and research only; any commercial use is prohibited. If your intellectual property rights are infringed on EasyEDA, please notify us by submitting relevant materials in accordance with the Rules for Complaints and Appeals of IPR Infringement.
Users must independently verify the circuit design and suitability when replicating this project. All risks and consequences are borne by the user, and the platform assumes no liability.
Empty
Comment