© 2024 EasyEDA Some rights reserved ISO/IEC
Brand new interactions and interfaces
Smooth support for design sizes of over 3W
devices or 10W pads
More rigorous design constraints, more
standardized processes
For enterprises, more professional users
Easy to use and quick to get started
The process supports design scales of 300
devices or 1000 pads
Supports simple circuit simulation
For students, teachers, creators
STD Fiero
Mode:
Battery Relocation
Open in EditorRemote Keyless Upgrade
Open in EditorElectronic Cruise Upgrade
Open in EditorTrans Temp Sender Addition Fiero
Open in EditorWiring Auxiliary Switches
Open in EditorC101 wiring
Open in EditorCruise Control Dash LIghts
Open in EditorNew Schematic
Open in EditorBosch relay
Open in EditorFAN Relay LED wiring
Open in EditorAux Connectors in Console
Open in EditorFP, AC and Trans Relays
Open in EditorLED lights in Dash
Open in Editor3800 Series II Wiring
Open in Editor3800 Series II Wiring A
Open in Editor3800 Series II Wiring B
Open in EditorFAN Relay LED wiring A
Open in EditorElectronic Cruise Upgrade A
Open in EditorID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | 12V | BAT | BATTERY | 1 |
2 | Disconnect Switch | U1 | DIP | 1 |
3 | Bosch Automotive Relay | U2 | DIP | 1 |
4 | Hidden Toggle Switch | S1 | TACTILE_SWITCH_SMD | 1 |
5 | 10 Pin Connector W/ LTRS | J1,J2 | 2X5-SHROUDED_LOCK | 2 |
6 | Clutch Switch | S1 | TACTILE_SWITCH_SMD | 1 |
7 | Brake Switch | S2 | TACTILE_SWITCH_SMD | 1 |
8 | Relay on Pass fenderwell | U1 | DIP | 1 |
9 | Console Switch w/ LED | SW1 | SW | 1 |
10 | 12V IGN | V1,V2,V3 | BATTERY | 3 |
11 | Optional Relay for Trans Coolant Fan ( future)\ | U2 | DIP | 1 |
12 | ZVN4206A | Q1,Q2 | E3 | 2 |
13 | CON-54722-0607 | J1,J2 | 54722-0607 | 2 |
14 | Tri COlor LED | U1,U3,U4 | DIP | 3 |
15 | 1k | R3 | R3 | 1 |
16 | 10K Ohm | R2 | R3 | 1 |
17 | Relay | U1,U2,U3,U4 | DIP | 4 |
18 | Fan LED | NO | DIP | 1 |
19 | Cruise ON LED | NO | DIP | 1 |
20 | Cruise Set LED | NO | DIP | 1 |
21 | 1N4148 | D1 | DO-35 | 1 |
Unfold
Loading...
Do you need to add this project to the album?