© 2024 EasyEDA Some rights reserved ISO/IEC
Brand new interactions and interfaces
Smooth support for design sizes of over 3W
devices or 10W pads
More rigorous design constraints, more
standardized processes
For enterprises, more professional users
Easy to use and quick to get started
The process supports design scales of 300
devices or 1000 pads
Supports simple circuit simulation
For students, teachers, creators
STD Simple, cheap and IC free float battery charger.
Mode:
Made to be easy, simple and straightforward, this module will control the charge of a car or lithium battery, just adjust the maximum charge by the multiturn trimpot. Once the maximum voltage is reached, the charging is cut off and approximately 2.5V (hysteresis) below the maximum voltage it will resume charging.
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | 470uF | C1 | CAP-D10.0×F5.0 | 1 |
2 | 1N4148 | D1 | DO-35_BD2.0-L4.0-P8.00-D0.5-FD | 1 |
3 | Floating LED | NO1 | LED-TH-3MM | 1 |
4 | VCC IN | P1 | CONN-TH_2P-P5.08_JL500-50002G01 | 1 |
5 | BATT OUT | P2 | CONN-TH_2P-P5.08_JL500-50002G01 | 1 |
6 | BC548B | Q1 | TO-92-3_L4.9-W3.7-P1.27-L | 1 |
7 | 200kΩ | R1 | RES-ADJ-TH_3296W | 1 |
8 | 1k | R2 | R_AXIAL-0.3 | 1 |
9 | 10k | R3 | R_AXIAL-0.3 | 1 |
10 | RELAY | U2 | RELAY-TH_RELAY-SPST | 1 |
11 | 1N4739A | ZD1 | DO-41_BD2.8-L4.2-P8.00-D0.7-FD | 1 |
Unfold
Loading...
Do you need to add this project to the album?